Plastic Fitting Instructions
Plastic curtains are relatively easy to install. The PVC generally comes supplied with all the fittings, including hanging rails and either hook-on, or bolt on plates.
The strips will be supplied slightly over the required length to allow for trimming once the curtains have been installed.
The reason for this is that PVC is cut from a roll, and once hung for a couple of days, the curvature will drop out allowing the individual strips to be easily trimmed with a craft knife or scissors.
If you have ordered a hook-on system, you will have the required number of hook-on top track/s and the individual PVC strips will be supplied with a hook-on plate attached, either stainless steel or polycarbonate depending on your order.
Nationwide Installation Service
On occasions you may have a particularly complex or difficult requirement for plastic curtains. Fortunately we are one of the few PVC suppliers who offer a nationwide installation service, so you can leave it in the hands of our expert installers. Covering all aspects of fitting, from straightforward doors to complicated shapes requiring additional steelwork, our competitive rates are sure to appeal. If you would like more information simply give one of our team a call on 01625 573971.
With the bolt-on system, you will receive the required length/s of bolt-on track/s, L-brackets to attach the track to the wall or soffit, together with the required number of plastic strips with holes drilled in them to match the bolt-on aluminium face plates.
The instructions below cover all aspects of PVC curtain installation and can be followed whether you have bought a made to measure curtain or individual components. N.B. Some steps may not be required with a made to measure curtain.